Build a Fiberon Good Life Deck Package

Installing Fiberon Good Life Composite decking

When figuring decking: Use 2.2 linear feet of decking per square foot of deck (board width+gap width is 5.625")

Don't forget to account for scrap, seams and any corners not cut at 90 degrees.

Face Screws

Figure 1.5 screws per linear foot of decking when joists are 16" on-center, or 2 screws per linear foot when joists are 12" on-center

Collated face screws for faster installation

Hidden fasteners for Fiberon decking

Camo Hidden Fastening Clips:

For decking running perpendicular to the joists:

For decking running at an angle to the joists:

Plug-and-screw hidden fasteners

Figure 1.5 screws per linear foot of decking when joists are 16" on-center, or 2 screws per linear foot when joists are 12" on-center. 

Also used on stair treads and borders when matching the hidden fastener look on the main deck area

Hidden edge fasteners for Fiberon Good Life decking

Edge Screws:

Figure 1.5 screws per linear foot of decking when joists are 16" on-center, or 2 screws per linear foot when joists are 12" on-center

When using grooved decking with edge screws, use Camo bit for grooved boards:

Collated edge screws

Figure 1.5 screws per linear foot of decking when joists are 16" on-center, or 2 screws per linear foot when joists are 12" on-center

Fiberon Good Life Composite Riser and Fascia boards:

Fascia should be installed with 1-7/8" wide-head screws

Figure 1.5 screws per linear foot of fascia

Fascia screws should have pre-drilled holes per manufacturer's installation methods