Build a Fiberon Sanctuary Deck Package

Installing Fiberon Sanctuary Composite decking

When figuring decking: Use 2.2 linear feet of decking per square foot of deck (board width+gap width is 5.625")

Face Screws

Figure 1.5 screws per linear foot of decking when joists are 16" on-center, or 2 screws per linear foot when joists are 12" on-center

Collated face screws for faster installation

Hidden fasteners for Fiberon decking

Camo Hidden Fastening Clips:

For decking running at an angle to the joists:

For decking running perpendicular to the joists:

Plug-and-screw hidden fasteners

Figure 1.5 screws per linear foot of decking when joists are 16" on-center, or 2 screws per linear foot when joists are 12" on-center. 

Also used on stair treads and borders when matching the hidden fastener look on the main deck area

Hidden edge fasteners for Fiberon Sanctuary decking

Edge Screws:

Figure 1.5 screws per linear foot of decking when joists are 16" on-center, or 2 screws per linear foot when joists are 12" on-center

When using grooved decking with edge screws, use groove bit below:

Collated edge screws

Figure 1.5 screws per linear foot of decking when joists are 16" on-center, or 2 screws per linear foot when joists are 12" on-center

Sanctuary Composite Risers and Fascia:

Fascia should be installed with 1-7/8" wide-head screws

Figure 1.5 screws per linear foot of fascia

Fascia screws should have pre-drilled holes to allow for expansion/contraction