DekPro Aluminum railing:
DekPro knockdown panels are installed between surface-mount aluminum posts, or aluminum 4x4 sleeves mounted over wood 4x4s (existing or new)
Surface-mount posts come with a post, skirt, cap, and leveling shims. Install with 5" lag screws into treated deck framing.
4x4 post sleeves do NOT come with caps or skirts, which will need to be ordered separately, if desired.
Bracket mounting jigs are available, to help level posts and for accurate panel bracket placement for horizontal rails.
Horizontal rod panels and vertical spindle panels are the two styles available for DekPro panels, depending on your taste (glass coming soon).
Vertical spindle panels come with top and bottom rails, spindles, brackets, and screws.
Horizontal rod panels come with a top rail, horizontal rods, vertical spacer, mounting brackets, and screws. These are available in stair or horizontal orientation.
Drink rail brackets are available, and will work with either rod rails or vertical spindle panels. These are attached around the top rail, and screw up into the board that is placed over the top rail. It is recommended to mount these every 24" along a top rail. Includes screws.
When installing a stair rail, a graspable handrail is required, with wall returns or loops at either end, and braces where railing spans more than 96".
Compatible Lighting Parts
Dekpro-compatible lights run on a 12v DC power source, which is supplied from one of the transformers on this page. Transformer would be plugged into a standard 110v wall outlet.
If a photosensitive timer is desired, the transformer would be plugged into the timer, which would then be plugged into the outlet.If a remote is desired, the remote would plug in between the timer and the first light
All lights have two leads for plugging 9' connector cables into, with one coming from the previous light or power source, and the other going to the next light. It is possible to have a splitter placed at the transformer to run wires in different directions from the transformer.
Post Cap Lights
Accent, Riser, or In-deck Lights
Wire, transformers, and other parts
